Products

The downpipes can be connected to each other with the pipe branch, so that a lateral inlet into a main line is possible.

Corner piece inside and outside, 135° RG 100 RG 125 Gray EAN 500522 EAN 500539 brown EAN 500461 EAN 500478 Anth...

With the outer corner, two gutter ends are connected to each other at a 90° angle using the cam-groove system. The insertion depth is marked on bo...

The semicircular gutter is made of impact-resistant, cadmium-free plastic. The connection is made by means of a connection shell with the cam-groo...

Gutter set RG 75 for log houses with side lengths of up to 3 or 4 m, complete set for 2 wooden house sides Available colours: Grey, brown and ant...

With the Marley Duplex gutter, all gutter elements are glued together with the Marley special adhesive. The glued areas must first be cleaned with ...

With the inside/outside corner, two duplex gutters can be connected at a 90° angle by gluing. Available colours: gray and brown

An end piece can be used to close the end of a duplex gutter by bonding. Gutter end pieces can be used on the left and right. End pieces cannot be ...

The adjustable gutter bracket is attached to the front board at a distance of 40 cm from the next bracket. The following brackets are aligned with...

Two duplex gutters can be connected using the adhesive method with the connecting shell. Available colours: gray and brown

The socket is used to drain rainwater into the downpipe. The gutter is fed undivided through the socket, with a hole for water drainage being sawn ...

The end piece has a seal and closes the end of a semicircular gutter with a plug connection. Channel end pieces can be used on the left and right....

The end piece has a seal and closes the end of a semicircular gutter with a plug connection. Channel end pieces can be used on the left and right....

The inside corner is used to connect two gutter ends at a 90° angle using the cam-groove system. The insertion depth is marked on both sides of the...

With the Marley RG 70 box roof gutter, all gutter elements are glued together with the Marley special adhesive. The glued areas must be cleaned bef...

The inside corner allows two box gutters to be joined at a 90° angle by bonding. Available colors:Gray, Brown, White, Anthracite, Anthracite Metallic

The gutter iron is galvanized and plastic coated in the color of the gutter. The gutter iron must be adjusted and bent on the roof. The gutter iron...

The plastic gutter holder can be screwed to a fascia board or to the adjustment bracket. The mounting distance is 50 cm. The gutter holder is fixed...

The connecting tray can be used to connect two box roof gutters using the adhesive method. Available colors:Gray, brown, white, anthracite, and ant...

The spigot is used to drain rainwater into the downspout. The gutter is passed through the spigot undivided, and a hole for water drainage is sawed...

With the Rainboy, the rainwater is not simply collected, but passes through a filter system and thus reaches your rain barrel or water tank purifie...

The easy-to-install rainwater collector is made of high-quality plastic and has a filter and overflow stop. It fits downpipes with a diameter of 53...

Rain collector with overflow stop and 1" hose and barrel connection. Marley rain collectors have an overflow stop based on the principle of communi...

Rain collector with overflow stop and 1" hose and barrel connection. Marley rain collectors have an overflow stop based on the principle of communi...